Springfield M1A SOCOM 16 with a rare set of complete VLTOR furniture. Includes three 20 round magazines, GG&G stubby foregrip, UTG bipod, and Sun & Shade low profile cheek riser, and original stock/chassis. Asking $1875 for everything shown.

A 10.5” Palmetto State upper, on an Aero Precision M4 Carbine lower with basic clamshell handguard, SBA4 brace, and UTG carrying handle.

10.5” direct impingement build. 10.5” Lead & Steel barrel, Sharps Bros Badlands blast diffuser, Geissele Mk8 handguard, Geissele SCH, Radian Raptor 45° safety selector, HRF magwell, Strike Industries takedown pins, Larue MBT2s, Aero Precision upper, lower and bolt carrier, and SBA5 brace.

Selling the full set if discontinued VLTOR furniture for a Springfield M1A. Comes with a GG&G shorty foregrip, and a UTG bipod. First picture is how my setup looked with it on. Chassis being sold only. DOES NOT INCLUDE RIFLE, SCOPE, OR MAG IN FIRST PICTURE.

A 1943 production Winchester M1 Garand with 5 clips

Everything on this rifle is HK with the exception of the upper and lower receiver, and barrel which is a BRN-7 set. Comes with a Geissele HK 417 charging handle, Trijicon Credo 2-10 FFP with green reticle on an ADM 20 MOA mount, Magpul bipod, Troy Industries stubby grip and QD mount, Blue Force Gear sling, four 20 rd magazines, and one 10 round magazine, and a hard case thats cut out to fit it all together. I am willing to separate if you are interested in just one single item.

10.5” direct impingement build. 10.5” Lead & Steel barrel, Sharps Bros Badlands blast diffuser, Geissele Mk8 handguard, Geissele SCH, Radian Raptor 45° safety selector, HRF magwell, Strike Industries takedown pins, Larue MBT2s, Aero Precision upper, lower and bolt carrier, Magpul BUIS, and SBA4 brace.

The top build is a build that was more cloned as a mix of Blood Diamond and Black Hawk Down. Upper is Palmetto State Armory 16” 5.56 with a faux suppressor in it, a Aero Precision carrying handle with a Leupold piggy back mount and a Vortex Strikefire II, the lower is a Ballistic Advantage lower receiver, the furniture is from retro parts, it also has a Surefire 6P with the correct Surefire rat tail cap and switch. The bottom is just a Palmetto State 10.5” upper on an Aero M4 Carbine marked lower with a UTG carrying handle.

This is a full 1976 Romanian AKM build with the receiver being Atlantic Arms, and all the furniture is all Romanian surplus, comes with 5 magazines. 1 Bakelite, 1 polymer Bulgarian Mag, 1 steel Bulgarian mag, 1 steel Korean mag, and a Polymer Kalashnikov mag. Also has an RS Regulate side mount with an all steel C-More red dot, and an DS Regulate barrel light mount with a Streamlight HL-X mounted, and a BFG AK sling in OD green.

This build is a build that was more cloned as a mix of Blood Diamond and Black Hawk Down. Upper is Palmetto State Armory 16” 5.56 with a faux suppressor in it, a Aero Precision carrying handle with a Leupold piggy back mount and a Vortex Strikefire II, the lower is a Ballistic Advantage lower receiver, the furniture is from retro parts, it also has a Surefire 6P with the correct Surefire rat tail cap and switch.

This is a HK 416c inspired clone, great for a backpack build. Its a 7.5” barrel with a DI system. Noveske KX5 flash suppressor, set into a Maxim Defense HK profiled upper receiver, unmarked Noveske bolt carrier, HK 416c 7” handguard, with an HK G36/UMP hand stop and VTAC sling adapter, HK profiled iron sights, Radian Raptor charging handle, Radian ADAC lower receiver, BCM pistol grip, Law Tactical Gen 3 folding adapter with an SBA5 brace, two 30 round Lancer .300 mags, two 20 round Lancer .300 mags, and a 30 round Magpul mag.

Smorgasbord or various parts. Trijicon Credo 2-10 FFP red in an ADM 20 MOA cantilever mount, Aimpoint PRO, Magpul Picatinny Bipod, Modlite PLH-V2 head/Reptilia .45° mlok body/Surefire UE tailcap, Cloud Defensive REIN, Holosun 403c GR, Holosun 403b GR, picatinny stubby grip with Modlite Modbutton, mlok Unity Tactical hotbutton, Troy Industries adjustable foregrip, Tango Down stubby WD grip.

An HK G3/91 trigger housing and an F/A trigger pack with a .308/7.62 ejector lever. The lever can be changed out for a 5.56 or 9mm easily.

This is an HK 416c inspired clone. Maxim Defense HK profiled upper with an HK 416c rail with a G36/UMP hand stop, 7.5” .300 blk with a Noveske KX3, unmarked Noveske bolt, Radian Raptor and HK iron sights.

This is a complete Radian ADAC lower with a BCM pistol grip, mil-spec lower parts kit, and a Gen 3 Law Tactical Folder and bolt adapter plug.

This is an HK P30 LEM with an HK Parts Compensator, HK Parts flared magwell, Trijicon night sights, Grey Ghost flat trigger and spring kit, 4 HK magazines, one has a +5 HK parts extended baseplate. Original box and parts.

Various parts. Haga Defense Bushmaster ACR brace adapter with metal Gear Head Works brace, 16” Bushmaster ACR barrel with piston, demilled HK UMP 45 rear receiver section, HK G3/91/PTR 32 Full Auto trigger pack/trigger housing/buttstock, Peltor 6 pin PTT, Magpul 1913 bipod (SOLD), Holosun 403b with short mount (SOLD), Holosun 403c solar with co witness mount (SOLD), Streamlight TLR-9, Cloud Defense REIN 1.0 w/ Arisaka 45° 1913 mount (SOLD).

This is a 16” Bushmaster ACR with a Franklin Armory binary trigger, has been sprayed with Krylon, come with adjustable and foldable buttstock, 2 Magpul magazines, and original trigger pack.

This is a 10.5” barrel for the Bushmaster ACR with a pistol length piston, and Surefire Warcomp Closed Tine. Barrel, comp, and piston only.

This is a pistol brace adapter for the Bushmaster ACR buttstock from Haga Defense with a metal Gear Head Works brace.

This is a SEF trigger housing with a F/A trigger pack for an HK roller delayed platform with a .30 cal ejector and buttstock

This is an Hard Head Veterans Gen 1 lvl IIIa Medium ballistic helmet in FDE with an Ops Core FDE helmet cover, FDE TNVC Mohawk, Peltor Comtac III single lead with arc rail adapters and a 6 pin Peltor PTT with boom mic, a Surefire HL1 in IR/White/Blue, an FR/MS-2000 IR/White/Blue emergency light, and a Notoros Rhino NVG mount, willing to part if you want a specific piece, but would rather keep it together.

This is a Crye Precision JPC 2.0 large swimmer cut, with a Haley Strategic Triple Magazine placard, Haley Strategic Flatpack plus, PIG shoulder cushions, Juggernaut case chest mount, First Spear Cummerband tube set, AXL admin pouch zipper, Blackhawk triple flashbang grenade pouch, NAR tourniquets, and trauma shear with zipcord.

This is an Omega Gideon Shadow kit to make a full HK UMP 45 clone. The entire upper is complete, and parts have been switched to genuine German made HK parts such as the extractor, charging tube and handle, and barrel retaining pin and HK UMP/G36 hand stop/sling point. It comes with everything pictured, all rails, German buttstock, one German LE/Mil restricted 25 round magazine, one US made 25 round mag, and a US made 15 round mag.

This is a standard Eotech 512. Havent had any issues with it. Had it mounted on my HK UMP 45 clone and has had maybe 800 ish rounds through it.

This is a black Modlite PLH-V2 with a Surefire UE tailcap on a Haley 45° picatinny light bar.

This is a 10.5” long scoop handguard for an HK 416 made by Maxim Defense, does not include barrel nut or screw.

This is a Modlite Modbutton with a surefire attachment in a Code 4 Defense stubby foregrip for picatinny.

This is a Pelican 1610 rolling case thats in good condition, a little salty from Afghanistan. Price is shipped.

This is the Ferro Concepts/Forward Observations Group Roll 1 Trauma Pouch with the Ferro insert and some goodies thrown in ODG

This is a Spiritus Systems SACK pouch mk3 in ODG

This is a Haley Strategic D3CRX in ODG with the mag inserts installed and an extra NAR tourniquet on a TQ holder under the rig, and another TQ holder on the left strap.

This is an Omega Gideon Shadow HK UMP 45 clone chambered in the lords caliber .45 ACP. Some parts have been switched to genuine German made HK parts such as the extractor, charging tube and handle, and barrel retaining pin and HK UMP/G36 hand stop/sling point. It comes with everything pictured, all rails, German buttstock, one German LE/Mil restricted 25 round magazine, one US made 25 round mag, and a US made 15 round mag. It has a S/E/F marked lower but is only safe and semi.

This is a Sig Sauer P365 XXL which is just a bit longer than an XL. It has an FDEZ Werx XXL ported slide and FDEZ Werx ported barrel, with a Sharps Bros aluminum pistol grip frame. On top is a Holosun EPS carry with a Green reticle. It comes with a TRex arms appendix holster for right hand thats fit for a Streamlight TLR-7 Sub with an extra mag carrier. It comes with 2 extended 15 round magazines, and 2 standard 12 round magazines, and its original box. The fire control group is stock, and so are the irons.