Tier One MSP or MSP Flex for an x300

Safariland 6354 RDS for Staccato P

Walther PDP 4.5 Inch Full Size

Eotech Vudu 1-6 FFP with Geissele 1.93 Mount. Wrapped in DNC, comes off easy.

Eotech Vudu 1-6 FFP with Geissele 1.93 Mount

Brand new never been fired. Text me at 720-371-1827

Like new shot 150 rounds through it. Comes with all the plates And 1 mag. Text me at 720-371-1827

Has been mounted but barely used. Has sat in the safe.

Great condition, has a couple mags through it. Comes with the original soft case, Trigger tech trigger, radian talons, radian SD charging handle, and dead air brake. I still the the original brake, and all of the gas block screw for adjustment and the iron sights.

I have about 400 rounds of PMC 308 and 80 rounds of hornady black amax. And 9 20 round pmags

Selling a holosun 508t on a trex arms 45 degree offset mount. There is some grey and black paint on it from a rattle can paint job. Comes with the original box for the red dot. Other than the paint it’s in great condition.

9 barley used AR10 Pmags

Barely used good condition Leupold VX-6 3-18x44 with TMOA reticle. Comes with the rings.

Gen 2 PST 5-25x50 EBR-2C MOA with Vortex Defender caps, MK Machining level and throw lever, Vortex pro series rings. $650 with rings $600 without

Brand new never been fired Springfield M1A loaded in 308

Urban Gray CZ P10F with Killer Innovations comp. The comp is $120 new. $600 + shipping

Staccato P steel frame all done up by monsoon tactical. Chunk port, stippling and cerakote in topo camo. Comes with case, 3 staccato mags and 3 Springfield prodigy 26rd mags. Will come with the 509t Dawson plate. X300 and 509t not included. Not looking for trades.

Like new cz 457 stock trigger

Up for sale is a built rifle, that has American Rifle Company Gen 1 Nucleus, X-Caliber 6.5x47 barrel MTU contour, MDT ACC, Triggertech Special, Area 419 Hellfire, 200+ pieces of Lapua brass, Redding type S full length sizing die, Forster ultra micrometer seating die. Everything that will get you going into PRS

MDT triple pull Ckye Pod with arca and picatinny clamp. $900 or trade for double pull plus cash on your end.

Like new gear head tail hook

For sale is a lightly used vortex razor Gen 3 1-10. Comes with the badger 1.7 height mount and on hundred concepts covers. I also have a T-2 12 o’clock mount that I can include.

I have 2 cases of Hornady TAP precision, 308win 155gr AMAX for sale. They are matching lots. $300 for 1 case or $500 for both cases. I can ship for an extra price.

I have a badger ordnance 34mm t2 12oclock mount. Has all the screws but no packaging.

I have 2 dead air KeyMo omega mounts, and 4 muzzle devices. 3 are 5/8x24 and the other is 1/2x28. Want to sell the mounts for 150 a piece and muzzle devices for 50 a piece. I’d like to sell the whole lot together. But I can sell 2 pieces at a time and I am willing to ship.

I have two 5/8x24 dead air KeyMo flash hiders

Up for sale is a like new sig sauer telescoping stock for 1913.

I have a like new sig sauer mcx rattler handgaurd for sale just want to get rid of it.

I have a like new maybe 30 rounds though it PSA 556 barrel with gas block and gas tube.

I have a lightly used Springfield Armory Emissary 1911 Chambered in 9mm. It has maybe 50-100 rounds through it. Was going to optic cut it and port it but decided to do other projects instead. Comes with 2 factory mags and all the original paperwork and soft case. Asking 800 OBO. Not interested in trades.

I have a like new, B&T stock for a cmmg dissent. This will directly mount onto your existing dissent. If you have the 1913 version, you remove the 1913 and this will replace that. The part brand new is 285. I’m asking 200 shipped. If you buy the adapters this will work on your B&Ts too.

I have a flir PTS 223 19-230 thermal for sale. It is used but has been well maintained. There’s nothing wrong with this just wanted to upgrade to something a little nicer. Does come with the ADM qd mount and the hard case.

I have a lightly used Sig sauer romeo 7s green dot with a ADM qd mount.

I have a 22 AR with a lot of bore buddy internals. It’s a palmetto lower and upper but I completely stripped it, put a 4.5” 22 LR barrel in. Has a CMMG conversion kit that has a new bolt head quiet buffer and weight kit. I upgraded the extractor and extractor spring so it’s a dream to shoot. It also has the folding brace or stock adapter on the back of it. It does come with the cmc trigger and bad lever. It also has the better mag adapter which allows it to run the better M&P 15-22 mags and gives it bolt hold open on the last round. I have 3 25rd and 2 10rd mags that comes with it. I have all the original parts and spring as well as extras. It has a long handagurd on it so you can tuck a can underneath it. It runs great, I just don’t shoot it as much anymore because of new toys. I’m asking $300 but there is way more into this than that. If your looking for a cool 22 that small and compact and to run a can on this is it! Shoot me an offer I’m just wanting it gone.

I have a like new sig 365 Macro with a holosun eps carry 2moa red dot, and a tlr 7a flex. It also has the sig magwell and the extended slide stop on it. Comes with the box and 2 mags and all the paper work. I have 2 of them and don’t need the second one. Asking 1100 OBO. Not really looking for trades.

I have a brand new never mounted warne skyline 34mm med 1 piece mount. These mounts are great I have 2 already and ended up not needing the third one. They retail for 225-275 I’ll sell it at 125 shipped.

I have a brand new never fired Springfield Armory Hellion 16”. I have other projects going on and don’t want to start another. Been sitting in the safe and want it gone.

I have a brand new never fired Springfield Armory Hellion 16”. I have other projects going on and don’t want to start another. Been sitting in the safe and want it gone.

I have a like new sig sauer Romeo 7s red dot on American defense low mount. Mounted and shot a few time but don’t like the green reticle, going back to red.

I have a like new trex arms sidecar with the clip and TQ holder. This is for the 365 macro with the Streamlight TLRA Flex or X now. 75 shipped

I’ve got an sig sauer canebrake handgaurd have been mounted but is in really good condition.

I have a brand new never mounted sit sauer Juliet micro 5x for sale.

I have a like new sig sauer folding stock adapter with the low profile tube with magpul SL-M stock.

I have a like new Unity tactical hot button, 7 inch cord for surefire.

I have a lightly used beretta 3032 that has a threaded barrel. Just looking to sell it, haven’t shot more than 2 boxes of ammo through it.

I have a MCX upper kit on a ballistic advantage lower for sale. The gun has about 500 rounds of subs and 200 rounds of supers through it. Runs great suppressed, haven’t shot it unsuppressed. Comes with the full upper kit, forward assist, lower with radian selectors and the mcx trigger, sb tactical brace with an sig locking adapter, ambi charging handle. It also has a Midwest industries 9inch sd handgaurd, which is perfect for a 6inch can in a backpack. It also has a rearden 3 prong flash hider on it. This gun is a dream to shoot and is a great backpack gun. I have a mpx and another rattler so don’t need this anymore. All in this guns is about 2500, giving someone a good deal and a new home!

I have a Midwest west industries MCX 10” sd handgaurd. There is a little rub mark on the handgaurd seen In The picture but other than that it’s in great condition.

I have a lightly used sig mcx trigger. Was in a rattler but switched to a different trigger.

I have a used MCX stock adapter kit, there is some wear at the top from the charging handle but other than that it’s in good condition.

I have a brand new Sig 1913 FDE brace, that has the locking adapter with it. No longer need this brace just want to get rid of it.

I have a safariland model 6354 made for the staccato p factory wrapped in grey cordora. This has the nub mod and ghost man designs portal in it. Also comes with the qls fork. I also have 2 trex arms mars carriers with the tekloks im wanting to sell. 125 for the holster, 30 bucks apiece for the mars carriers, or 150 for it all!

I have a like new, SB tactical 1913 brace with the aluminum bar that has an sig locking hinge assembly. This is a must so the brace doesn’t fold under recoil. Retail this is 400 bucks, I’m selling it for 300 shipped. Shoot me a text 7203711827

I have a like new Unity fast offset optic base with the Acro mount. Comes with the two shorter screws and the two longer screws. This works of the fast risers and the lpvo mounts. Retails for over $100 bucks I’m asking 75 shipped. Shoot me a text at 720371827

I have a Daniel defense PCC with a bunch of extras. The gun has maybe 300 rounds though it. It’s a great gun but just sits in the safe. The gun has a cherry bomb on the end of it, has a rise trigger, sb tactical pdw brace, sig rifle light and switch, and a Romeo 5. I have a 3 35 round mags and a 50 round drum. Also have a black b5 pistol grip I’ll throw in.